Installer

A 1day course covering the installation of GypCeiling MF (MF Ceilings) this includes setting out, forming suspension point, extending components, forming bulkheads/changes in ceiling height and boarding.

A 1 day introductory course on GypCeling Grid (lay in grid ceilings) covering setting out, forming suspension points, creating bulkheads and changs in ceiling height as well as the installation of ceiling tiles.

A self paced course which is an introduction to Gypwall Single Frame Partitions.

This one-day course is designed to introduce learners to the installation of GypLyner Encase (framed encasement) and FireCase encasement systems (frameless encasement), and also for experienced fixers to help demonstrate their competency through manufacturers training.

This one-day course is ideal for both trainees and experienced dryliners who want to expand their knowledge and practical skills through manufacturers training.

This practical one day course is ideal for beginners looking to learn how to install Gypwall Shaft, and also for experienced fixers to help demonstrate their competency through manufacturers training.

A 1 day introductory course on GypCeling Grid (lay in grid ceilings) covering setting out, forming suspension points, creating bulkheads and changs in ceiling height as well as the installation of ceiling tiles.

A 1day course covering the installation of GypCeiling MF (MF Ceilings) this includes setting out, forming suspension point, extending components, forming bulkheads/changes in ceiling height and boarding.

This one-day course gives participants the skills to install British Gypsums two metal wall-lining systems for the commercial sector.

A follow on to the Introduction to GypWall Single Frame Partitions, also suitable for installers wanting to move into commercial work from residential or those that have previous experience of metal stud and want refresh their knowledge and skills.

This 2-day course is a great opportunity to develop practical knowledge and experience.

Improve your knowledge and practical skills in the construction of drylining to masonry backgrounds using the 'Dot and Dab' method.

This is a 3-day long course where participants will develop the practical knowledge and skills to board timber and metal stud partitions and apply plasterboard to masonry backgrounds using the “dot and dab” method for the first time.

A 1 day course on the application and finishing of Gyproc Spray Finish. Please note that we also offer a 3 day variant of this course which includes preparation of joints prior to spraying.

Plastering for Beginners is a three day introduction course that teaches participants how to mix and apply Thistle Finish plasters to plasterboard backgrounds.

This two-day course is a great introduction for beginners who want to learn how to finish plasterboard ready for decoration. During the course attendees will have a go at both skimming and hand taping.

Improve your knowledge and practical skills in the application of hand taping to tapered edge joints, butt end joints, internal and external angles.

Improve your knowledge and practical skills in using the mechanical jointing tools for walls, internal angles and applying external angles by hand application and ideal follow on after completing the Hand Taping course.

This one-day course is designed for those in the retrofit market looking to install British Gypsums two metal framed Internal Wall Insulation systems - GypLyner Single and GypLyner Independent

This two-day course will help self-builders and installers to upskill in practical knowledge and understand the benefits of British Gypsum sound solutions to improve the acoustic comfort in customers homes.

This module will examine the PAS2035 and PAS2038 standards as of Oct 2023

This module will give you an introduction to retrofit, and set you up to learn more about retrofit in our other e-learning modules and resources

This module will look at what is meant by a whole building, and fabric first approach.

This module will help you understand how central people are to all stages of the retrofit process.

A 1 day course on the application and finishing of Gyproc Spray Finish. Please note that we also offer a 3 day variant of this course which includes preparation of joints prior to spraying.

This two-day course is a great introduction for beginners who want to learn how to finish plasterboard ready for decoration. During the course attendees will have a go at both skimming and hand taping.

A short self paced E-Learning module to cover products and accessories associated with mechanical taping, application and common faults.

A short self paced E-Learning module to cover products and accessories associated with hand taping, application and common faults.

Improve your knowledge and practical skills in using the mechanical jointing tools for walls, internal angles and applying external angles by hand application and ideal follow on after completing the Hand Taping course.

Improve your knowledge and practical skills in the application of hand taping to tapered edge joints, butt end joints, internal and external angles.

This is a 3-day long course where participants will develop the practical knowledge and skills to board timber and metal stud partitions and apply plasterboard to masonry backgrounds using the “dot and dab” method for the first time.

This 2-day course is a great opportunity to develop practical knowledge and experience.

A follow on to the Introduction to GypWall Single Frame Partitions, also suitable for installers wanting to move into commercial work from residential or those that have previous experience of metal stud and want refresh their knowledge and skills.

This one-day course is ideal for both trainees and experienced dryliners who want to expand their knowledge and practical skills through manufacturers training.

A self paced course which is an introduction to Gypwall Single Frame Partitions.

This practical one day course is ideal for beginners looking to learn how to install Gypwall Shaft, and also for experienced fixers to help demonstrate their competency through manufacturers training.

A 1 day course on the application and finishing of Gyproc Spray Finish. Please note that we also offer a 3 day variant of this course which includes preparation of joints prior to spraying.

A short course to learn the key features and benefits of ThistlePro Finish

This two-day course is a great introduction for beginners who want to learn how to finish plasterboard ready for decoration. During the course attendees will have a go at both skimming and hand taping.

Plastering for Beginners is a three day introduction course that teaches participants how to mix and apply Thistle Finish plasters to plasterboard backgrounds.

Increasingly popular as the technically superior method of achieving ever more stringent insulation requirements, External Wall Insulation (EWI) has a wide range of possible insulants, systems and finishes. The course is suitable for applicators, estimators and surveyors.

Improve your knowledge and practical skills in the application of hand taping to tapered edge joints, butt end joints, internal and external angles.

This is a 3-day long course where participants will develop the practical knowledge and skills to board timber and metal stud partitions and apply plasterboard to masonry backgrounds using the “dot and dab” method for the first time.

Improve your knowledge and practical skills in using the mechanical jointing tools for walls, internal angles and applying external angles by hand application and ideal follow on after completing the Hand Taping course.

Improve your knowledge and practical skills in the construction of drylining to masonry backgrounds using the 'Dot and Dab' method.

This 2-day course is a great opportunity to develop practical knowledge and experience.

A follow on to the Introduction to GypWall Single Frame Partitions, also suitable for installers wanting to move into commercial work from residential or those that have previous experience of metal stud and want refresh their knowledge and skills.

This one-day course gives participants the skills to install British Gypsums two metal wall-lining systems for the commercial sector.

This one-day course is designed for those in the retrofit market looking to install British Gypsums two metal framed Internal Wall Insulation systems - GypLyner Single and GypLyner Independent

This two-day course is a great introduction for beginners who want to learn how to finish plasterboard ready for decoration. During the course attendees will have a go at both skimming and hand taping.

This two-day course will help self-builders and installers to upskill in practical knowledge and understand the benefits of British Gypsum sound solutions to improve the acoustic comfort in customers homes.

Plastering for Beginners is a three day introduction course that teaches participants how to mix and apply Thistle Finish plasters to plasterboard backgrounds.

A short self paced E-Learning module to cover products and accessories associated with hand taping, application and common faults.

A short self paced E-Learning module to cover products and accessories associated with mechanical taping, application and common faults.

A 1day course covering the installation of GypCeiling MF (MF Ceilings) this includes setting out, forming suspension point, extending components, forming bulkheads/changes in ceiling height and boarding.

A short course to learn the key features and benefits of ThistlePro Finish

A 1 day introductory course on GypCeling Grid (lay in grid ceilings) covering setting out, forming suspension points, creating bulkheads and changs in ceiling height as well as the installation of ceiling tiles.

Increasingly popular as the technically superior method of achieving ever more stringent insulation requirements, External Wall Insulation (EWI) has a wide range of possible insulants, systems and finishes. The course is suitable for applicators, estimators and surveyors.

The Digital Commercial Site Managers Course runs across four, one-hour modules that are delivered remotely. The course focuses on the correct installation of British Gypsum products relating to fire and acoustics.

This digital version of the Residential Site Managers Course is delivered in two one-hour modules remotely. Designed to upskill supervisors in the residential sector, the course is a flexible option for those unable to do training in person or stay off-site for longer periods of time.

This practical one day course is ideal for beginners looking to learn how to install Gypwall Shaft, and also for experienced fixers to help demonstrate their competency through manufacturers training.

Our introduction to environmental awareness e-learning course is designed to help learners understand what the environment is and why it is important to protect it

If you’re in a building that was built before the year 2000, it probably contains asbestos. The dangers that asbestos presents are serious, with it being responsible for around 5,000 deaths per year. Employers must ensure that anyone who could disturb asbestos while carrying out their everyday work understands what asbestos is and how to work in a competent and safe way, without risk to themselves or others.

So you may have heard the term "circular economy" - but what does it mean in practice? This module will help unravel the term.

This module will discuss the 10 key sustainability issues facing the home building sector, and how best to tackle them in a way that's good for the environment and your business.

This one-day course is ideal for both trainees and experienced dryliners who want to expand their knowledge and practical skills through manufacturers training.

This one-day course is designed to introduce learners to the installation of GypLyner Encase (framed encasement) and FireCase encasement systems (frameless encasement), and also for experienced fixers to help demonstrate their competency through manufacturers training.

Aimed primarily at those using monocouche materials for the first time

This two-day course is a great opportunity to develop practical and theory knowledge around the use of Saint-Gobain systems for the retrofit of properties including External Wall Insulation (EWI), Internal Wall Insulation (IWI) and Loft Insulation.

This three-day course is a great opportunity to develop practical and theory knowledge around the use of Saint-Gobain systems for the retrofit of properties including External Wall Insulation (EWI), Internal Wall Insulation (IWI) and Loft Insulation.

A self paced course which is an introduction to Gypwall Single Frame Partitions.